Stainless steel decorative panels not only possess the luster and strength of metal, but also have a constant color. It has excellent chemical and physical properties and is widely used in the decoration industry. When choosing this kind of decorative board, everyone needs to know how to install it correctly. Today, the editor will introduce the installation method of stainless steel decorative panels and the installation precautions of stainless steel decorative panels!

　　First of all, what is the installation method of stainless steel decorative plates? Divide;Install the skeleton-Fixed base plate-Fixed panel-Edge banding and other treatments. The first step is to install the keel framework. During these installation processes, we must remember to repeatedly check the verticality and flatness.

　　Then comes the fixation of the base plate. The base plate is usually5-12mmThick plywood. The construction methods and requirements are the same as those for ordinary wooden covers. However, if the keel is a light steel keel or an Angle steel keel, please first use an electric drill to drill a hole in the keel. Fix the base plate to the keel with self-tapping screws. Please note that the screw head must not be higher than the surface of the base plate.

　　Then comes the fixation of the panel. When there is a base plate, apply universal glue to the back of the base plate and the stainless steel, and then gently stick the prepared stainless steel plate onto the base plate. When there is no base plate, fix the pre-treated stainless steel plate on the light steel keel and use stainless steel screws or directly weld it to the keel. For the final edge sealing treatment, sealant is filled into the corners or edges of the stainless steel, as well as the right corners. The edges are sealed by pressure or other methods and decorated. Wipe the surface of the stainless steel decorative plate with a soft dry cloth and then remove the protective film.