When using stainless steel round pipes, the following points should be noted

　　1Processed components and finished products,Surface treatment can only be carried out after acceptance.

　　2Burrs, flux coating, weld beads, spatter, dust and dirt on the surface of stainless steel pipes, etc,It should be cleaned up before rust removal,At the same time, the loose oxide scale and the thicker rust layer should be removed.

　　3If there is oil stain or grease on the surface of the stainless steel pipe,It should be removed thoroughly before rust removal. If there is only oil and grease on some areas,Generally, some treatment methods can be selected;If there is a large area or the entire area,Then, organic solvents or hot alkali can be selected for cleaning.

　　4When there is acid, alkali or salt on the surface of stainless steel pipes,Hot water or steam can be used to rinse it off. However, attention should be paid to the treatment of wastewater,It cannot cause environmental pollution.

　　5Some newly rolled stainless steel pipes,To prevent rusting during short-term storage and transportation,And apply protective paint. For stainless steel pipes coated with protective paint,It should be dealt with according to the specific circumstances. If the protective paint is a two-component coating cured by a curing agent,Moreover, the coating is basically intact,Then, sandpaper, stainless steel pipe velvet roughening or a light spraying method can be used for treatment,And after cleaning up the dust,Then the next construction process can be carried out.

　　6A coating for protecting the surface of stainless steel pipes by applying workshop primer or general primer,Generally, the treatment method should be determined based on the current condition of the coating and the subsequent matching paint. All that cannot be further coated or affect the adhesion of the next coating,It should be completely eradicated. When choosing fireproof coatings for stainless steel pipe structures.

　　When it comes to stainless steel round pipes, the following points should be particularly noted:

　　1Do not apply decorative fireproof coatings to stainless steel pipe structures,Decorative fireproof coatings are flame-retardant materials that protect flammable substrates such as wood structures,The thin coating film fails to reach the intended fire resistance limit of the advanced stainless steel pipe structure.

　　2Thin-coated stainless steel pipe structure expansion fireproof coating should not be used for protection2hThe above stainless steel pipe structure. Demand fire resistance limit2hThe above stainless steel pipe structure,It is necessary to choose thick-coated fireproof and heat-insulating coatings for stainless steel pipe structures.

　　3No fireproof coating shall be applied to the indoor stainless steel pipe structure,No improvement was made and no useful waterproofing methods were adopted,The stainless steel pipe structure directly used for spraying protection outdoors.

　　4Thick-coated fireproof coatings are basically composed of inorganic materials,Coating stability,Slow aging speed,As long as the coating doesn't fall off,The fireproof function is guaranteed. Considering durability and fire resistance,Thick-coated fireproof coatings are preferred. The structural system of stainless steel pipes is a commonly used structural method for stainless steel pipes,It is mostly used in large-span public buildings, industrial plants and some buildings and structures that have special requirements for building space, building form and building function,

The current stainless steel pipe structure residential system,It is receiving more and more attention from us. The structural system of structural stainless steel pipes can generally be classified into single-layer single-span, single-layer multi-span and multi-layer multi-span and other structural methods,To meet the demands of different architectural forms and functions.

      Foshan Weilihuang Trading Co., Ltd. is a leading manufacturer specializing in the production and sales of international and domestic stainless steel hardware accessories and its own brands. The company is located at Tianjinli Hardware Accessories Center, Lanshi 2nd Road, Chancheng District, Foshan City, Guangdong Province8seat10-12The number (i.e., the main entrance of the market) has an abundant supply of goods, a complete range of varieties, wide coverage, favorable prices, and stable and superior quality!

The company uses high-quality stainless steel and exquisite craftsmanship to ensure there are no weld marks at the interfaces. Its products feature novel designs, elegant craftsmanship, and long-lasting durability. The company has always adhered to the principle of quality first and reputation first. It is equipped with mature production facilities and has strong technical strength, thus ensuring the quality of its products. The company is willing to make unremitting efforts to join hands with our customers to create a win-win situation and provide high-quality products for our partners.