I was thinking of fixing the stainless steel decorative cover to the railing against the wall, but I just couldn't fix it properly. How should I fix the stainless steel decorative cover?

1Draw grooves of the size of the decorative strips on the stone surface. The depth is determined as needed, that is, by the size of the decorative strips above the board surface or the inlay size. The depth of the grooves should be slightly deeper than the actual size.

2Apply the marble glue in the stone trough, insert the stainless steel decorative strips into the stone trough, determine the position height and dimensions of each location, and place them.

3After waiting for a few minutes, when the marble glue is not completely dry, use a utility knife to scrape off the excess or spilled glue. Wait until it is completely dry.

1Apply the marble glue directly to the bottom of the decorative strip. After determining the size, stick it onto the stone surface. Generally, it is recommended to use an Angle grinder to roughen the bonding area first.

2After waiting for a few minutes, when the marble glue is not completely dry, use a utility knife to scrape off the excess or spilled glue. Wait until it is completely dry.